Ballistic Shields - Bulletproof Tactical Sheilds



Ballistic Shields | Tactical Shields | Police Shields

Shop Ballistic Shields, Police Shields, Tactical Shields

NIJ Level IIIA, III, and IV  Tactical Shields for Police & Military Personals.

Buy with confidence from  SecurityProUSA a manufacturer and developer of ballistic shields, made to serve and protect our law enforcement communities . USA-made and battle-tested in our own ballistic testing firing ranges.

Modern Ballistic Shields are protective shields designed to protect police, military, or anyone from deflected bullets either from handguns, rifles, and other projectiles such as rocks and arrows fired at their carrier. It also acts as an effective solution against less serious threats during riot situations where riot shields don't offer adequate protection. The ballistic shields are built with UDPE material providing maximum protection against ballistic materials and are battle-tested in some of the harshest of conditions. Offers optional viewport with NIJ certified Level II ballistic polycarbonate which allows for increased peripheral vision.

For more than 20 years, Security Pro USA has been the source for Ballistic Shields, Ballistic Partitions and protective solutions. Using our vast experience and sophisticated expertise, our representatives are dedicated to offering you advanced ballistic shields that are in compliance with NIJ standard 0108.01 as well as UL. As a result, Security Pro USA offers a variety of ballistic shields in a variety of sizes and protection levels, from brands you can trust such as SecPro, Special Ops Bunker  United Shield, KDH, Hardwire and many others.


$ $
Product type

Frequently asked questions

How to adjust ballistic face shield?

1. Helmet Compatibility: Ensure that the face shield is compatible with your ballistic helmet. Different models may have specific attachment mechanisms.

2. Attachment Points: Locate the attachment points on the helmet. These are usually located on the sides or front of the helmet.

3. Mounting the Shield: Align the face shield with the attachment points and secure it firmly. This might involve snapping, sliding, or screwing the shield into place, depending on the design.

4. Adjustment for Fit: Once attached, adjust the shield for a comfortable fit. This may involve sliding the shield up or down to align with your field of vision, or adjusting side straps or screws for a secure fit.

5. Checking the Seal: Ensure that the shield forms a good seal around the helmet to provide maximum protection. There should be no large gaps between the helmet and the shield.

6. Field of Vision: Adjust the shield so that it does not obstruct your field of vision. You should be able to see clearly in all necessary directions.

7. Testing Mobility: Move your head in different directions to ensure the shield does not restrict your movement or slip out of position.

8. Regular Checks: Regularly check the shield for any signs of damage or wear, and ensure that it remains securely attached to the helmet.

Remember, the specific steps can vary depending on the make and model of the ballistic face shield and helmet, so it's important to refer to the manufacturer's instructions. If you have any difficulty or uncertainty, consult a professional or the equipment manufacturer for guidance.

What are ballistic shields made of?

Ballistic shields are made from materials that are both strong and lightweight, providing a balance between protection and mobility. The common materials used in ballistic shields include:

  1. High-Performance Polyethylene Fibers: These are ultra-strong, high-modulus polyethylene fibers, such as those used in Dyneema or Spectra. These materials are known for their high strength-to-weight ratio and are often used in personal body armor.
  2. Aramid Fibers: Aramid fibers, like Kevlar, are another common material used in ballistic shields. Kevlar is well-known for its use in bulletproof vests. It has excellent strength and energy absorption properties, making it effective at stopping bullets.
  3. Ceramic Plates: Some ballistic shields incorporate ceramic plates, which are effective at dispersing the energy of a bullet upon impact. These plates can be made from materials like boron carbide or silicon carbide. They are often used in conjunction with other materials to enhance protection.
  4. Composite Materials: Many ballistic shields are made from composite materials, which combine layers of different substances to maximize protection. These composites often include layers of polyethylene or aramid fibers and may also incorporate metal or ceramic plates.
  5. Polycarbonate or Acrylics: For shields designed to protect against less lethal threats (like thrown objects or hand-held weapons), materials like polycarbonate or acrylic can be used. These materials provide impact resistance and visibility.
  6. Metal Alloys: In some cases, especially for more robust riot shields or specialized tactical shields, metal alloys might be used. However, due to their weight, they are less common in ballistic shields designed for gunfire protection.

The choice of materials depends on the intended use of the shield, the level of protection required, and considerations such as weight and mobility. The manufacturing process typically involves layering these materials to create a barrier capable of stopping or slowing bullets and other projectiles.

How heavy is a ballistic shield?

The weight of a ballistic shield can vary widely depending on its size, materials, and design. Typically, handheld ballistic shields used by law enforcement can weigh between 10 to 30 pounds (4.5 to 13.6 kg). Some specialized shields, like those designed for full-body protection or for breaching operations, can be significantly heavier.

Are ballistic shields bulletproof?

Ballistic shields are designed to be bullet-resistant rather than completely bulletproof. They are rated to stop certain calibers and types of ammunition based on their NIJ (National Institute of Justice) rating. For instance, a Level IIIA shield can stop handgun rounds, while a Level IV shield is designed to stop armor-piercing rifle rounds.

How effective are ballistic shields?

Ballistic shields are highly effective in providing protection against the types of projectiles they are rated for. They are designed to absorb and disperse the energy of bullets, shrapnel, and other projectiles, significantly reducing the risk of injury. However, their effectiveness is contingent on the shield's quality, its NIJ rating, and proper usage.

How to clean a ballistic face shield?

To clean a ballistic face shield, use a mild soap and water solution or a lens cleaning solution for the transparent parts. Avoid harsh chemicals or abrasive materials that could scratch or damage the shield. For the non-transparent parts, a damp cloth can be used. After cleaning, dry the shield with a soft, dry cloth.

How are ballistic shields made?

Ballistic shields are made using layers of high-strength materials like Kevlar, ultra-high-molecular-weight polyethylene, or composites incorporating ceramics or metals. These materials are layered to create a barrier capable of absorbing and dispersing the energy of bullets and other projectiles. The manufacturing process is precise and often involves advanced technology to ensure the highest level of protection.

What can a ballistic shield stop?

The stopping power of a ballistic shield depends on its NIJ rating. Shields rated Level IIA, II, and IIIA are designed to stop handgun rounds. Level III and IV shields can stop rifle rounds, with Level IV being capable of stopping armor-piercing rounds. The shield's ability to stop a projectile also depends on factors like the angle of impact and the range of the shot.

How much is a ballistic shield?

The price of a ballistic shield varies based on its size, material, and protection level. Simple handheld shields can cost a few hundred dollars, while more advanced tactical models with higher NIJ ratings can cost several thousand dollars.

Are ballistic shields legal?

 In most places, owning a ballistic shield is legal for civilians. However, the legalities can vary by country, state, and local jurisdiction, so it's important to check local laws and regulations.

Is it illegal to have a ballistic shield in California?

 As of my last update in April 2023, owning a ballistic shield in California is legal for civilians. However, laws and regulations can change, so it's advisable to consult current local laws for the most accurate information.

What kind of round penetrates ballistic shields?

The type of ammunition that can penetrate a ballistic shield depends on the shield's rating. High-powered rifle rounds, armor-piercing bullets, and certain calibers exceeding the shield's rated protection level can penetrate it. The effectiveness of a shield against specific rounds is determined by its NIJ rating.

How do ballistic shields work?

Ballistic shields work by using layers of high-strength materials to absorb and disperse the kinetic energy of projectiles. This reduces the impact force and prevents or minimizes penetration. The materials used, such as Kevlar or polyethylene fibers, are designed to "catch" and slow down bullets, spreading their force over a larger area.

Are ballistic shields rated for high powered rifles?

Some ballistic shields are rated to protect against high-powered rifles. These are typically Level III or IV shields according to NIJ standards. Level III shields can stop most rifle rounds, while Level IV shields are capable of stopping armor-piercing rounds.

Can a person break an arm using a ballistic shield?

While carrying a ballistic shield, there is a minimal risk of breaking an arm if used correctly. Improper handling or using a shield that is too heavy for the user can lead to strain or injury. Training and proper technique are essential to minimize this risk.

How do people put ballistic shields on their backs?

 Some ballistic shields are designed with straps or harness systems that allow them to be carried on the back when not in use. This enables quick deployment while keeping the hands free for other tasks. The method of mounting varies with the design of the shield.

How thick is ballistic shield glass?

The thickness of the glass or transparent material in a ballistic shield varies depending on its protection level. Typically, the transparent sections of a Level IIIA shield (capable of stopping handgun rounds) might be around 1 to 1.5 inches (2.5 to 3.8 cm) thick. Shields designed to stop higher-caliber rounds will have thicker glass.