Ballistic Panels

Mobile battle Panels feature a high quality laminated bullet resistant Fiberglass core sandwiched inside a Molded Expanded Polystyrene (MPS). The surface is still gentle to the touch, tackable, but the centered fiberglass core is exceptionally strong. The weight of each 4'X6' Armored Panel is 115 lbs. (UL-3). Custom panels can be made to fit your size and protection requirements.

 

UL Listed Bullet Resistant Fiberglass. This material is manufactured using a starch-oil woven roving ballistic grade fiberglass cloth. The cloth is mechanically injected with a thermoset polyester resin and placed in a hydraulic hot press, then pressed into flat rigid sheets up to 4' X 9'. By using a starch-oil ballistic grade fiber in the cloth, the ballistic performance is maximized by consistently achieving a uniform resin to fiber ratio. This allows the proper ply delamination to encapture projectiles. Excessive resin left behind in the manufacturing process results in a thicker, less effective product. By using the correct amount of pressure and heat during the curing process, excessive resin is eliminated from Bullet Resistant Fiberglass, always resulting in a product that provides the maximum amount of protection at the lightest weight. This Bullet Resistant Fiberglass is approved by the U.S. Marshal Service, the General Services Administration, and complies with NIJ standards.

 

Mobile Battle Panels are compatible with specific trucks and special fabrics. These bullet resistant panels can be wheeled into place when needed and wheeled back into storage when not needed. The optional trucks make the extra weight of the armored panels easy to move about.

 

Above is a picture of the stronger UL5 rated ballistic panels (7.62 rifle, 150 grain). The wheel trucks are stronger since a 4'x6' unit can weigh around 400 lbs. These wheel trucks are equipped with "total lock" casters, where the wheel and rotation can be locked. These are upholstered with a fabric and tackable core. The casters are placed so that a 90° angle can be acheived with only three panels. Other designs, sizes and colors or messages (signage) are available. Shipping is extra. Just tell us your needs.

 

 

Here is a sample of the clear UL-5, Battle Panels. This can be directional (attack side and safe side) or bi-directional meaning that it doesn't matter which side gets shot at.

 

 

Mobile  Battle Panels clear and non mobile. ADA compliant. Panels will interlock. Flat pedestals, no tripping hazard. Double overlap at joints prevent bullet intrusion.

 

We can offer "rated ballistic glass" or a product that is not officially rated by Underwriters Laboratories (UL) or the National Institure of Justice (NIJ). The cost for the unrated product is about 1/2. The performance is about the same. Above is a test of the unrated ballistic glass/polycarbonate product. It stopped a single 7.62mm round with no spalling in the back. This is similar to what the UL-5 officially rated ballistic glass will do. 

 

This image shows the diversity of colors and styles that are available along with a window at the top, all ballistic rated. 

 


 

Need just the cores? No problem! These internal cores are the thinnest and lightest that you can buy for the level of protection provided. Listed below are ballistic fiberglass cores in 8 different protection (thickness) levels. Choose the series number you need, and request a shipping quote.

Series
Wt.
Thick ness
Protection Levels
Weapon
Ammunition
Velocity
3'x8'
4'x8'
 
lbs/sq.ft. (kgs/sq.mtr)

in. (mm)

     
ft/sec
   
60
1.2 (6)
1/8 (3)
NIJ I

.22 LRHV

.38 Special

40 Gr. Lead

158 Gr. Lead

1050±40

850±50

Call
Call
80
2 (10)
3/16 (5)
UL1 (MPSA)
9 mm
124 Gr. FMJ
1175-1295
Call
Call
100
2.4 (12)
1/4 (6)
NIJ II-A

.357 Magnum

9 mm

158 Gr. JSP

124 Gr. FMJ

1250±50

1090±40

Call
Call
200
3 (15)
5/16 (8)
NIJ II, UL2 (HPSA), UL 6

.357 Magnum

9 mm

158 Gr. JSP

124 Gr. FMJ

1395±50

1175±40

Call
Call
300
4 (20)
7/16 (12)
NIJ III-A, UL3 (SPSA)

.44 Magnum

9 mm

240 Gr. Lead

124 Gr. FMJ

1400±50

1400±50

Call
Call
350
5.5 (27)
9/16 (14)
MIL-STD, 662E V50

.30 Carbine

12 GA Shotgun

110 Gr. FMJ

1 oz. Slug

2109

1864

Call
Call
400
12 (59)
1-3/16 (30)

NIJ III

UL4 (HPR)

UL5

UL7

7.62 mm Rifle

.30 CAL Rifle

7.61 mm Rifle

5.56 mm Rifle

150 Gr. FMJ

180 Gr. SP

150 Gr. FMJ

55 Gr. FMJ

2750-3025

2450-2794

2750-3025

3080-3388

Call
Call
460
13.4 (66)
1-5/16 (33)
UL8
7.62 mm Rifle
150 Gr. FMJ
2750-3025
Call
Call
UL listed products levels 1,2,3,4 and 6 (UL 752 8th edition revised 04/29/94
UL 752 Revision dated 04/29/94 as tested by H.P. White laboratories levels 5,7,8
NIJ - National Institute of Justice, UL - Underwriters Laboratories, FMJ, Full Metal Jacket, JSP - Jacketed Soft Point, MPSA - Medium Power Small Arms, HHPSA - High Power Small Arms, SPSA - Super Power Small Arms, HPR High Power Rifle, SP - Soft Point

3'x8' and 4'x8' prices are listed, 3'x9' and 4'x9' are available! For pricing, we need to call our vendors to get the latest costs involved. give us a call or email us with your needs.

 

For more information on our Ballistic Panel Solutions please fill out the form below.