Shat-R-Shield Ironclad HBFL | 450W/600W LED High-Bay Flood Light

Purpose: Shat-R-Shield Ironclad® HBFL is a high-output LED high-bay/flood luminaire for high mounting locations such as covered industrial areas, building exteriors, large circulation spaces and supervised recreation yards. The wide-area application does not make HBFL a ligature-resistant occupied-cell fixture.

Catalog model references: FX848HBFL450W (450W) and FX848HBFL600W (600W). These are the SKU values currently listed by Security Pro USA. Confirm the complete manufacturer ordering code, mounting hardware, beam distribution and current pricing for each configuration before purchasing.

Listed technical configurations — confirm on manufacturer submittal

• 450W / approximately 72,000 lm / 5000K, subject to selected distribution and driver.
• 600W / approximately 96,000 lm / 5000K, subject to model-specific documentation.
• Current catalog-listed input voltage: 100–277 VAC; ask the manufacturer to verify any high-voltage option.
• Current catalog-listed dimensions: about 18 in. diameter × 10 in. tall; main unit approximately 29–33 lb. depending on configuration.
• Catalog-listed family ratings: IP65 and IK08; DLC configuration reported. Obtain current, model-specific listing and photometric documents for procurement.
• Control and accessory options described in product materials: dimming, sensor, mounting trunnion/bracket and visor. These accessories are not assumed included in the listed variant.
• Current catalog-listed LED L70: over 36,000 hours; manufacturer limited warranty listed as five years. Confirm the applicable warranty terms.

Common applications and planning

HBFL may suit large recreation yards, covered facilities, exterior loading areas and broad industrial zones where significant illumination is required from elevated mounting points. Provide the mounting height, spacing, wind/exposure conditions and site lighting plan. For indoor sealed food-processing washdown needs, compare WDHB; for a rectangular vapor-tight high bay, see VTHB.

Frequently asked facility-buyer questions

Which model should I request, 450W or 600W?

Choose only after reviewing the site's target light levels, mounting height and distribution. Listed wattage and catalog lumens alone cannot establish the required area coverage; request matching photometric/IES files.

Does IP65 mean it can withstand pressure washing?

IP65 describes dust ingress protection and protection against water jets; it does not establish IP69K high-pressure/high-temperature washdown suitability. For harsh washdown, compare the WDHB or LDL families and verify cleaning requirements.

Is the fixture suitable inside an occupied detention cell?

The listed IK08 impact rating is not equivalent to an IK10 requirement, and impact resistance does not establish ligature resistance. Consult the facility security specification and select a dedicated correctional-cell product if required.

Are the visor and trunnion bracket included?

The available accessory options are listed separately in product materials. Confirm precisely which accessories, fasteners and controls appear on the signed quotation.

What should procurement include in an RFQ?

Provide model/wattage, quantity, installation height, intended application, target lighting levels, voltage, beam distribution, controls, mounting method, environmental exposure, required listings, delivery ZIP code and project timeline.

Related: WDHB washdown high bay · VTHB vapor-tight high bay · Browse Shat-R-Shield lighting · Request project pricing / RFQ.

The model figures above are listed catalog values, not a replacement for the current manufacturer specification sheet, IES files and certification documents for the configured fixture.