Yates Positioning Lanyard (6 & 8') with RAD Adjuster
Positioning Lanyard (6 & 8') with RAD Adjuster
NEW Adjustable positioning lanyard with BLACK BlueWater ArmorTech Rope Lanyard and ISC RAD Adjuster. Lanyard is made from BLACK 12mm" BlueWater ArmorTech Rope for increased durability over sharp edges. Rope is dry coated with a Teflon compound to reduce water absorbtion. The outer sheath of ArmorTech rope is 100% Technora which is extremely fire resistant with a melting point over 900 degrees. The New rope adjusting machanism from ISC in Wales is the RAD. The RAD is the only rope adjuster of its kind to Pass ANSI Z359.3-2007 "Safety Requirements for Positioning and Travel Restraint Systems".
RAD with 3 meter Technora Rope Lanyard allows for a full 8 ft. of adjustment, also offered is Rad Lanyard with only 6 ft. of adjustable length. Strength 4500 lbf. (20kN) Tested in position of use in single leg attaghment configuration.
NEW RAD with 2.3 meter Technora Rope Lanyard allows for a full 6 ft. of adjustment. Strength 4500 lbf. (20kN) Tested in position of use in single leg attaghment configuration. (This lanyard is exactly 2 ft. shorter than 3 meter lanyards. Only available with Green/Ornge tracers.
- BlueWater 12mm BLACK ArmorTech Rope Lanyard. with Teflon dry coating. 6,600 lbf. (29 kN), Lanyard Length 8 ft usable adjustment.
- New Aluminum snap hooks located on shock absorber and legs meet 3600 lbf. (15kN) side load gate strength requirements of ANSI Z359.12-2009 standard.
- Meets ANSI/ASSE Z359.3-2007, ANSI/ASSE Z359.12-2009 and EN12841:2006-C Standards.
RAD only meet ANSI Certification if configured with 12mm Armortech Lanyards. RAD w/Lanyard attached are now marked to be compliant with ANSI Z359.3-2007 (Safety Requirements for Positioning and Travel Restraint Systems)
ISC ANSI 1135 Carabiner is secured to with retainer pin to RAD so that it is not removable.
ISC ANSI 1135 CARABINER IS CERTIFIED TO MEET ANSI/ASSE Z359.12-2009 STANDARD