Manpack Jammer

Manpack Jammer

SecPro

This product is available.

Total Output Power 70W

The Manpack tactical jammer has been designed to neutralize RF and cellular communication during special units’ activity in the field. The MP uses state-of-the-art technology for maximum performance. The unit is controlled by a FPGA for DDS & TxDac programming.

The MP transmits a noise signal which cuts off RF communications at HF, V/UHF, Cellular & Wi-Fi bands. The unit protects against RCIEDs detonated remotely by HF, V/UHF, Cellular or Wi-Fi networks. The protection muting ratio is up to 6:1 (depends on environment conditions).

The MPIED jammer is supplied with high quality Lithium-Ion/Polymer battery and provides up to 4 hours of continuous operation. The MP is supplied with a temperature sensor that controls the silent fans, for an automatic and necessary use only. Our MP’s design approach is supporting MIL-STD810F. Additionally, the MP808 is supplied with a special backpack case & Remote Control.

 

OPERATIONAL SCENARIO

  • Jamming distance:  40M
  • VSWR protector
  • High gain Omni-Directional antennas
  • GUI for programming desired bands and Open Communication Window
  • Thermal protection
  • Low battery indicator
  • Remote Control Operation
  • Unit complies with IP65 standard
  • Set of Antennas –  Omni direction and directional high gain
  • Programmable frequency bands

TECHNICAL SPECIFICATIONS

RF Characteristics

Total Output Power Up to 30W per band
Internal Modulation FM Hopping Frequency + White Noise
Signal Source PDDS & TxDac
Power Supply 25.9VDC/40Ah
Li-Ion/Polymer Rechargeable Battery
Modules Per Unit Up to 8
Remote Control Wired

Jamming Frequency Range

Frequency Frequency Band According to customer requirements
Air Interface Standards Digital: IDEN, TDMA, CDMA, GSM, 2G, 3G, 4G, Wi-Fi

Physical Data

Dimensions 460 x 350 x 150 mm
Weight w/o Battery Approx. 15 Kg
Weight with Battery Approx. 19.5 Kg

Environment of operation

Operating Temp -20ºC to +55ºC
Humidity 5% – 95% – Non Condensing
Mil Spec Standard MIL-STD810F

*Specifications are subject to change without prior notice
Ver. 1.00.09.16