(THIS PRODUCT IS MADE TO ORDER WITH A 8-12 WEEK LEAD TIME)
Hesco 200 Series Shooter Cut BI P210 Level IIIA+ Multi Curve - Stand Alone Plates
NIJ Level IIIA+ Certified Shooter Cut Stand Alone Plates
200 Series plates are designed to be worn where concealability is an asset, featuring models that offer both low visibility and special threat protection.
Single and multi curve designs in shooter, full and SAPI cuts are available depending on model.
200 Series offers specialized ballistic and stab resistant stand alone inserts for use when a low visual signature is required.
Shooter Cut Stand Alone Plates Features
- Advanced Composite Materials
- Cost Effective & Reliable
- Single & Multi Curve Design
- Highly Durable, Waterproof, Polyurethane Coated, Cordura Nylon Wrap
- Precision Quality Control
Shooter Cut Stand Alone Plates Specifications
THICKNESS: 0.27 in (7 mm)
SHOOTER CUT - MULTICURVE - TORSO PLATES
|PART NUMBER||WIDTH x LENGTH||WEIGHT|
|P210-SH-MC-L||10.0 x 12.0 in
(254 x 305 mm)
|P210-SH-MC-S||8.0 x 10.0 in
(203 x 254 mm)
Actual nominal sizes are 0.2 inches smaller than listed.
Thickness dimensions are ± 1/8 in (± 3 mm).Width and length dimensions are ± 0.13 in (±3 mm). All weights are ± 5%.
Hesco Testing Protocol
NIJ Certification of hard armor requires submission of 10” x 12” test plates which
must demonstrate the ability to defeat specific rounds tested to a valid NIJ shot
pattern, after exposure to a stringent conditioning protocol to simulate aging
and wear. Level IIIA requires six .357 sig (9 mm FMJ in the case of NIJ 0108.01)
and six .44 mag per plate.
NIJ’s process provides for the inclusion of other size torso plates of identical
construction to be included under the Certification without further NIJ testing.
Hesco holds itself to a higher standard by publishing the minimum number of
shots that each size plate can be expected to defeat under similar NIJ testing
methods, as well as listing many additional threats not addressed under the NIJ
Certification process. The minimum number of shots are shown in the Threat
Thread Performance Matrix
|9 x 19 mm Parabellum||6||3|
|FN 5,7 x 28 mm||6||3|
|7.62 x 25 mm Tokarev||6||3|
Additional ammunition types were tested within some of the matrix categories.
Contact Hesco Armor for a complete list.
Advanced UHMWPE design. Buoyant. Multi shot rated on selected threats. Water repellant polyurethane coated CORDURA® fabric finish. Made in the U.S.A.
Special threat testing conducted in accordance with NIJ Standard–0101.06 (modified).
Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard–0108.01.
Hesco operates a quality management system certified to ISO 9001:2008.
Approved Certificate Numbers: C2016-01513; BA9000: 2012; AQAP 2110