EOD suit Security Pro EOD suit made to military specifications EOD Suit Catalog - Click Here EOD Catalog - Click Here Product Details Stock #: EOD suit EOD BOMB DISPOSAL SUIT including helmet. Currently in service throughout the world with Bomb Disposal Teams, the SECURITY PRO EOD Bomb Disposal Suit is a state-of-the-art garment specifically designed to give the highest level of protection with the maximum comfort and flexibility to the user. The ballistic levels and materials used in the various components of the EOD Bomb Disposal Suit are tested and evaluated to the full quality assurance standard laid down by the appropriate Government organizations. The suit consists of the following separate items, which collectively make the complete garment. Jacket with attached collar Trousers – adjustable Breast plate Groin plate Helmet and visor Air cooling blower Transit bag Integral radio earphones and microphone in helmet. Protection performance figures are for the Stanag 17 grain (1.1gm) fragment simulator. Front Collar 600 V50 (m/s) Chest 600 V50 (m/s) Groin 600 V50 (m/s) Legs 500 V50 (m/s) Back Collar 500 V50 (m/s) Back 500 V50 (m/s) Arms 500 V50 (m/s) Protection provided with Up Armour Plates fitted into pockets provided in the suit: Type 1 V50 Type 2 V50 Collar 1000 m/s 1 kg 1600 m/s 2.1 kg Chest 1000 m/s 1.9kg 1600 m/s 4.3 kg Groin 1000 m/s 2 kg 1600 m/s 4.5 kg Protection Matrix Kevlar ® HT Security Pro/BBA proprietary anti trauma system. Outer material : Nomex ® 111 Trauma Reduction: Type 1 and 2 Up Armour Blast Plates have a double layered backing of a resilient, closed cell, linear foam which has a comprehensive modulus of 4350 psi (astm d 1621).The collar chest groin and front of the legs have built in anti trauma inserts. Cooling Suit: The suit can be worn with commercially available equipment. Pockets to accommodate the power pack, controls and ice reservoir can be provided at no extra cost on the back of the suit. Cooling Suit OPTION: The Security Pro Cooling Suit is designed to offer a safe and cool environment for people who must maintain a high level of efficiency and concentration under extreme heat. The system is ideally suited for persons involved in bomb disposal and surveillance operations, as well as personnel in non-air-conditioned armored vehicles. The Security Pro Cooling System uses ice water to remove body heat produced during strenuous work, especially in hot environments. The suit requires no hazardous pressurized canister or toxic cooling agents. Made from machine washable, fire retardant Nomex, the Security Pro Cooling Suit also offers protection against heat and flash fire balls. Testing of the suit on the effects of over-pressure, fragmentation, ballistics, body impact and heat have shown this suit is suitable for use under bomb suits, chemical suits and many other applications where body heat removal is desirable. The kit includes a long-sleeved shirt with cooling on trunk and arms, long legged pants with cooling on legs, a close fitting open faced hood for head, a cooling unit and pouch, two water bottles, battery pack and carrying bag. SPECIFICATIONS: Performance: Heat Removal Rate: 270 watts (full suit) Endurance min. 45 min at 35 ° C (95 °F) Cooling Unit: Control: On/Off Pump: 9V Cold Source: Ice cubes and water Power: External pack, 4 x 9 alkaline 'D' cell batt. Weights: Suit: 1.0 kg Cooling Unit Dry: 0.5kg Ice Cubes: 1.2kg Water: 0.7kg Battery Pack: 0.5kg Material: Garment: Kermel stretch knit fabric, flame retardant Sizing: Small: 150-175 cm; 40-75 kg Medium: 170-185 cm; 70-90 kg Large: 175-193 cm; 85-110 kg Compatibility: Worn next to skin under any clothing Cooling unit can attach to bomb suit via Velcro Second water/ice bottle supplied for stand-by Large capacity ice water container can be supplied PRICE $1950.00 MATERIALS Helmet $3000.00 if ordered separately.Included in prices shown. *Molded GRP skin with elastomeric Aramid core. *Anti – ballistic visor made from hardened acrylic/ polycarbonate laminate. *Suspension harness – webbing and ballistic nylon. *Weight – 4.5kg *V50 (helmet) – 610m/s *V50 (visor) – 700m/s Jacket and trousers *Ballistic inserts made from multi-layered water-repellent Kevlar 129 HT 1100dtex. *Outer cover – Nomex *Color – Military green *Weight – 15kg *V50 – 600m/s Blast plates *Molded from woven roving with added fire retardant polymers. *V50 – 1000m/s Weights: Suit without up Armour Blast Plates 15.3 kg Suit with type 1 Up Armour Blast Plates 20.2 kg Suit with type 2 Up Armour Blast Plates 26.2 kg Power Pack: A 12V power pack is provided with the suit, which has a special pocket on the back to accommodate it. Output: 12v x 7a/h. Battery types Starved Electrolyte Lead Acid. The battery has 2 outlets: 1. Dedicated to helmet ventilation and demisting system. 2.12v outlet for accessories. Recharging: A mains charger is provided plus a 12v - charger cord for plugging into a 12v -dc source such as a cigarette lighter. A 90 % rapid recharge can be achieved in 15 minutes by plugging into a vehicle cigarette lighter with the engine running. An emergency power pack is also provided utilizing eight pen light batteries. BALLISTIC EOD HELMET The EOD helmet is made from a sandwich construction system developed by and unique to the company and is fully adjustable by means of the three-point suspension. Incorporated in the helmet is the facility for a communication set consisting of two headphones with one microphone and extension lead for attachment to any VHF radio transceiver. Also incorporated in the helmet is an Air Ventilation system, which directs the flow of, forced fresh air over the top of the helmet liner, across the visor and down over the operator’s face ensuring efficient demisting and clear view. This system can be used in conjunction with a canister (NBC or chemical) configuration. Protection Performance: Helmet 600 m/s Stanag 17 grain (1.1) fragment simulator and visor 700m/s. Ventilation and Demisting: This is provided by a helmet mounted fan. Maximum capacity: 250 liters/min. Controls: Single knob On/Off plus 3 speeds. This is operator accessible in a custom built pocket on the suit. Weight 4.7kg Communications: The helmet has a built in speaker and microphone on the right hand side .An external socket is provided for connection to a wireless or hardwire system. The hardwire communications system is designed specifically for EOD teams using EOD bomb disposal suits. The system provides communication between the bomb disposal operator and his back-up and consists of a plug which connects to the helmet's inbuilt earpiece and microphone, 100m of twisted cable mounted on a spool, a headset, speaker/amplifier and carry bag. Optional Extras: 1. Wireless: Duplex hand held radios (two) VHF/UHF US$ 925.00 2. Hardwire: 100m range with or without slipring facility. Slipring facility enables communications to be maintained whilst the the "hard wire" is being deployed. A control amplifier is provided with speaker, microphone and tape outlet. US$ 500.00 Hardwire with Slip ring facility US$2750.00 3. Ambient Sound Feature: An external microphone is mounted on the outside of the helmet and a speaker in the helmet on the LH side enabling the operator to hear noises in his environment. This has an automatic high decibel cut out. This facility is controlled with an ON/OFF switch and volume control accessible to the operator in a pocket provided on the suit.US$300.00 4.Video Camera: A bracket can be provided on the helmet for a small video camera powered from the the 12v power pack. Transmission of data can be either by wireless or hardwire. US$ 500.00 5. Torch: A bracket can be provided for a torch, which can be self powered or use the 12v power pack.US$65.00 Ballistic EOD helmet with fan and canister configuration JACKET The jacket is a long sleeved, side opening design filled with flexible Kevlar ballistics. Provision is made on the front for the attachment of rigid chest and groin blast plates by means of integral packets with webbing and Velcro securing straps. Pouches for working tools, air blower and radio are attached to the front and back of the outer cover. The high collar provides overlap protection to the helmet and visor. Immediate removal of the jacket is achieved by use of the quick-release straps attached to the side and shoulder. TROUSERS The trousers have fully adjustable supporting braces and wide Velcro waistband catering for small, medium and large sizes. At the rear of the legs a full-length Velcro strip is used in conjunction with the retaining straps to fix the articulated flexible armour in position. The over boots are an integral part of the trousers and are held in position by Velcro, leather and webbing straps. Suit with type 1 Up Armour Blast Plates Suit with type 2 Up Armour Blast Plates Helmet with built in speaker and mike Power pack (one supplied FREE) additional $500.00 FOB Emergency Power Pack (one supplied FREE) additional $60.00 FOB Mains Charger (one supplied FREE) additional $70.00 FOB 12v Charger cord (one supplied FREE) additional $30.00 FOB All armour products are produced to international standards including: (US) N.I.J 0101.03, (German) Technische Richtlinie Schutzwesten and (U.K) Police Science Development Branch Body Armour Standard FULL Specs will be given on request. NSN 8470-99-990-0090 Prices on application
