Aimpoint CompM3, The Aimpoint CompM3 Incorporates Over 30 Years of Aimpoint's Internationally Recognized Design Innovations, The Aimpoint Compm3 is Also Reported to Be More Rugged Than Aimpoint's Other Sights

Home » Government and Military Products » US Consulates and Embassies Security Purchasing » New Security Products » GG&G Tactical Equipment, GG&G Manufactures Very High Quality Mounts and Scopes, » Aimpoint CompM3, The Aimpoint CompM3 Incorporates Over 30 Years of Aimpoint's Internationally Recognized Design Innovations, The Aimpoint Compm3 is Also Reported to Be More Rugged Than Aimpoint's Other Sights

Send Page to a Friend

The Aimpoint CompM3 tactical optic incorporates over 30 years of Aimpoint's internationally recognized design innovations. The CompM3 is reported to be more rugged than Aimpoint's other sights. This sight features Advanced Circuit Efficiency Technology (ACET) that gives the sight unparalleled battery life and ease of use. Although sometimes overlooked, it is important to note that this optic is parallax-free with unlimited eye relief. The CompM3 is compatible with all generations of night vision. It has ten settings of brightness intensity: 4 NVD, and 6 daylight, of which one is extra bright. The CompM3 holds up under the roughest physical handling and can withstand the most severe weather conditions and temperatures. In fact the CompM3 is completely submersible and will withstand pressures over 2.5 atmospheres allowing it to be taken up to 45 meters underwater. The latest ACET technology allows approximately 50,000 hours of daytime operation on intensity setting 7. Approximately 500,000 hours of use on the night vision settings. The CompM3 comes with a replaceable, outer black rubber cover which protects the housing from scratches etc. The CompM3 is available from GG&G with the 2 MOA dot size.

GG&G Standard Aimpoint Ring

The GG&G Standard Aimpoint Ring was designed to maximize the Aimpoint's tactical features. Manufactured from 6061 T6 billet aluminum and type III hard coat anodized black, this rock solid ring is attached to a dovetail by using a squeeze rail design incorporating a single elliptical thumbnut. There is also a square locking cross bar for recoil control.

GG&G Cantilever Aimpoint Ring

Unlike some other mounts on the market today, the GG&G Cantilever Aimpoint Ring is manufactured to the correct height for co-witnessing with Back Up Iron Sights. It's light weight ergonomic design places the Aimpoint far enough forward on an AR15/M16 flat top to insure quick target acquisition. The Aimpoint Scope is securely held in place with six socket head cap screws and the mount includes a waterproof spare Aimpoint battery compartment. All edges of the mount have been dehorned to protect the shooter in combat environments. It is manufactured from 6061 T6 solid billet aluminum and hard anodized per MIL-SPEC in a matte black finish. The captivated elliptical thumbnut and spring activated sidebar provide an easy yet solid method of attachment to the weapons dovetail base.

GG&G Accucam Cantilever Aimpoint Ring

The GG&G Accucam Cantilever Aimpoint Ring has the same features as our original Cantilever Ring, the body is manufactured from solid billet 6061 T6 aluminum, six cap screws firmly hold the scope in place, and the insulated waterproof battery compartment keeps the spare battery handy. The Accucam QD Locking Lever System provides a solid method to quickly install or remove the Aimpoint from the weapon. The Aimpoint can be installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can just as quickly be removed. Unlike other systems, it is fully adjustable for worn or out of spec MIL-SPEC-1913 dovetails. In tests the Accucam Cantilever Ring has shown to be repeatable to 1/2 MOA. The loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and virtually snag proof.

AIMPOINT COMPM3 & GG&G BEST VALUE PACKAGES

Purchase the Aimpoint CompM3 with the rock solid GG&G Standard Aimpoint Ring as a Best Value Package for only $502.00--A $720.50 Retail Value!

Purchase the Aimpoint CompM3 with the light weight and ergonomic GG&G Cantilever Aimpoint Ring as a Best Value Package for only $527.00--A $731.50 Retail Value!

If you need a Quick Detach Mount, we have a terrific Best Value Package for that set up as well. Purchase the Aimpoint CompM3 with the GG&G Accucam Cantilever Aimpoint Ring, the most flexible quick detach mount available today for the Aimpoint, at the Best Value Package Pricing of only $567.00--A $768.00 Retail Value!


	Live Chat by LivePerson

Top Sellers